Cortec · Caterpillar preservation
CAT-approved Cortec products for equipment preservation
Cortec® corrosion protection for engines, spare parts and components during storage and shipment.
Select preservation oils, water-based fluids and temporary coatings by CAT 1E specification, approval status and storage application.

For dealers · Rebuild shops · Equipment owners
Selecting a VCI oil for CAT preservation requirements
When a preservation instruction or purchasing request names a VCI oil, the real requirement is protection of the specified surfaces throughout storage. A suitable choice must match the component, the CAT specification, the application method and the plan for returning the equipment to service.
Start with VpCI-329 for oil-based preservation
VpCI-329 has final approval listed for CAT 1E2359 and 1E4970. Its combination of contact and vapor-phase corrosion inhibitors makes it a relevant option to evaluate for compatible oils and enclosed metal systems. VpCI-329 D and VpCI-330 also have final approval listed for 1E4970.
Share your required CAT specification, component and preservation procedure. We will help select the Cortec formulation and application method for your equipment.
Shop VpCI-329A shared VCI function does not make products interchangeable at the same dosage. Match the exact formulation, specification and procedure before making a substitution.
From the service bay to the warehouse
Idle equipment needs corrosion protection, too
An engine awaiting installation, a rebuilt transmission or a machined spare part can corrode while it sits in storage. VCI preservation fluids—also called layup or hibernation fluids—help protect metal during these periods of inactivity. Depending on the formulation, they work through a surface film, vapor-phase inhibitors inside an enclosure, or both.
Cortec offers preservation oils, water-based fluids, temporary coatings and fogging products. The selection starts with the exact product, the CAT specification and the approval status.
The product is listed with final approval for the specification shown. The scope applies to that formulation and use.
Acceptance is conditional. Confirm its application limits before including the product in a preservation procedure.
Cortec product selection
Fluids with final CAT approval
Explore preservation products for engines, transmissions, metal components and spare parts. Each approval applies to the listed formulation and specification.

Oil-based preservation
VpCI®-329 & VpCI®-329 D
VpCI-329 is an oil-based concentrate for compatible lubricating and preservation oils. Contact inhibitors protect wetted metal, while vapor-phase inhibitors help protect enclosed surfaces above the oil level. VpCI-329 D is a ready-to-use, diluted formulation.
For the documented CAT engine and turbocharger preservation applications, mix VpCI-329 1:1 with Caterpillar DEO 10W-30 engine oil (50% VpCI-329 and 50% oil).
CAT specificationVpCI-329: 1E2359 / 1E4970
VpCI-329 D: 1E4970

Low viscosity · Thin protective film
VpCI®-330
A low-viscosity rust preventive oil that stays homogeneous without shaking. A practical option for temporary protection of machined components, with a clear oily film that makes the underlying surface easier to inspect.
CAT specification1E4970

Water-based preservation
BioCorr® & BioCorr® ATF
BioCorr leaves a dry, nearly invisible film on metal parts. BioCorr ATF is a distinct formulation designed for transmission preservation. Select the formulation for the component and process involved.
CAT specificationBioCorr: 1E4971 / 1E4969 · THP + AS
BioCorr ATF: 1E4971

Indoor component protection
VpCI®-325
A protective and lubricating fluid for metal surfaces during indoor storage. Useful for machined parts and assemblies when its protective film is compatible with the next manufacturing or assembly step.
CAT specification1E4971 · THP + AS

Water-dilutable concentrate
VpCI®-377
A water-based concentrate that leaves a clear, dry protective film. Suited to indoor preservation of metal components by spraying or dipping, with concentration selected for the process and protection period.
CAT specification1E4971 · THP + AS

Removable temporary coating
VpCI®-391
A water-based coating that dries to a thin, non-tacky protective film. The clear-to-hazy finish allows visual inspection of the metal, with removal by an appropriate alkaline cleaner when required.
CAT specification1E0335 · THP

Specific formulations
VpCI®-369 (1:1) & VpCI®-369 Blue
These specific formulations have final approval under the specification below. Their oily protective film suits temporary surface preservation. Request the exact variant and preparation required by your procedure.
CAT specification1E4973
THP means threaded hole protection without removing the product for that use. AS means use on bolted-joint abutment surfaces without removal. These designations apply only to the listed products and uses; follow the applicable assembly instructions.
Confirm the application scope
Fluids with conditional CAT approval
The products below are listed as CA-00. Confirm their conditions of acceptance for your component and process before selection.

Oil additive
M-531
A corrosion-inhibitor concentrate for compatible mineral or synthetic oils. The base oil, additive compatibility and treatment level must be selected for the preservation process.
CAT specification1E2359 A, B, C

Enclosed-space fogging
VpCI®-337
A ready-to-use water-based corrosion inhibitor for fogging enclosed voids. Distribution through the cavity and effective sealing are essential parts of the preservation plan.
CAT specification1E2359 / 1E4971

Temporary surface coatings
VpCI®-389 & VpCI®-389 D
Temporary rust preventives for metal surfaces. The original and diluted formulations have different specification listings; confirm the exact formulation and conditional scope before use.
CAT specificationVpCI-389: 1E0335 / 1E4970
VpCI-389 D: 1E4970 / 1E4968B
Quick reference
Cortec products & CAT 1E specifications
A formulation-by-formulation reference for maintenance, engineering, purchasing and parts teams.
| Product / formulation | CAT specification | Status | Use designation |
|---|---|---|---|
| VpCI-329 | 1E2359 / 1E4970 | Final | — |
| VpCI-329 D | 1E4970 | Final | — |
| VpCI-330 | 1E4970 | Final | — |
| BioCorr | 1E4971 / 1E4969 | Final | THP + AS |
| BioCorr ATF | 1E4971 | Final | — |
| VpCI-325 | 1E4971 | Final | THP + AS |
| VpCI-377 | 1E4971 | Final | THP + AS |
| VpCI-391 | 1E0335 | Final | THP |
| VpCI-369 (1:1) / VpCI-369 Blue | 1E4973 | Final | — |
| M-531 | 1E2359 A, B, C | Conditional | — |
| VpCI-337 | 1E2359 / 1E4971 | Conditional | — |
| VpCI-389 | 1E0335 / 1E4970 | Conditional | — |
| VpCI-389 D | 1E4970 / 1E4968B | Conditional | — |
Build a preservation plan
Match the protection to the next service
Define the application
Identify the component, materials, storage duration and whether protection is needed inside a closed system or on exposed surfaces.
Match the specification
Confirm the required CAT 1E specification, product variant, dilution, application method and approval scope.
Plan the return to service
Include sealing, inspection and any cleaning, draining or refilling steps required before assembly or operation.
Complete the package with appropriate VCI films and export packaging. Explore our rust preventive oils and water-based rust preventives for related applications.
VCI oils & CAT engine preservation FAQs
What CAT specifications apply to VpCI-329?
Start with the required CAT specification, the component being protected and the approved application method. VpCI-329 is an oil-based Cortec option with final approval listed for 1E2359 and 1E4970. Confirm the exact procedure, concentration, materials compatibility and return-to-service requirements before substituting products.
How should I select a VCI preservation oil?
Product names alone do not establish interchangeability. Send the CAT part number, current preservation instruction and required specification to VCI & Lubricants. We can help identify a suitable Cortec formulation and verify its scope before an order is placed.
How do VpCI-329 and VpCI-329 D differ?
VpCI-329 is a concentrate; VpCI-329 D is a ready-to-use diluted formulation. The approval listings shown here are also different: VpCI-329 is listed for 1E2359 and 1E4970, while VpCI-329 D is listed for 1E4970.
Is conditional CAT approval the same as final approval?
No. FA identifies final approval for the listed specification. CA identifies conditional approval, whose application limits must be confirmed. Approval applies to the exact product formulation and specified use.
Where can I buy Cortec preservation products in the United States?
Order listed products from the VCI & Lubricants online shop. For drums, custom formulations, volume pricing, purchase orders or a product not listed, contact sales@vciandlubricants.com. Current pricing and availability are shown on the product pages.
VCI & Lubricants LLC
Protect the component.
Prepare for the next service.
Tell us the component, storage period and required CAT specification. Include the preservation procedure so we can help select the appropriate Cortec product and package size.
Ask about your application →Shop links show current pricing, package sizes and availability. Online orders are subject to the shop’s terms and shipping policy. For drums, special formulations, larger orders, purchase orders or payment terms, contact us for a quotation.
Cortec®, VpCI® and BioCorr® are trademarks of Cortec Corporation. CAT® and Caterpillar® are trademarks of their respective owners. VCI & Lubricants supplies Cortec products.
